SCZ13-10kV series dry-type three-phase on load tap changer transformer

The epoxy resin cast dry-type on load tap changer is equipped with a dry-type on load vacuum tap changer and an intelligent controller (hereinafter referred to as YJK-1).
View more

SZ13-10kV series dry-type three-phase on load tap changer transformer

The SZ13 series 10kV on load tap changer power transformer is an energy-saving distribution transformer designed and produced by our company. It is widely used in power, railway (public) roads, residential areas, commercial centers, high-rise buildings, remote mountainous areas, dusty and polluted places.
View more

SCB13-27.5kV series dry-type three-phase power transformer

Epoxy cast non excited pressure regulating dry transformer is made of F-grade epoxy resin mixture with fillers. After vacuum film degassing, high and low voltage coils reinforced with glass fiber forming mesh are placed on the inner and outer surfaces of the thin layer casting under vacuum and pressure.
View more

S13-27.5kV series oil immersed three-phase power transformer

The S13 series 27.5kV no-load tap changer power transformer is an energy-saving distribution transformer designed and produced by our company, widely used in railways, large and medium-sized industrial and mining enterprises, and 27.5kV substations. The product has the characteristics of reasonable structural design, high operational reliability, significant energy-saving effect, strong overload capacity, and low noise. Compared with products produced according to current national standards, the average no-load loss has decreased by 20-30%, and the no-load current has decreased by 50-60%. Reaching the advanced level of similar international products.
View more

TES series oil immersed (dry-type) inverse Scott transformer

The reverse Scott transformer is a special type of transformer that can convert the two-phase electricity (two single-phase with a phase difference of 90 °) of the power supply (referred to as the road network) into three-phase electricity, that is, the traction equipment side (referred to as the station side).
View more

SCZ13-35kV series dry-type three-phase on load tap changer transformer

The epoxy resin cast dry-type on load tap changer is equipped with a dry-type on load vacuum tap changer and an intelligent controller (hereinafter referred to as YJK-1). The intelligent controller is mainly used to control the dry-type on load vacuum tap changer, and the switching operation of the on load tap changer is controlled by the electric operating mechanism inside the on load tap changer to achieve the purpose of voltage regulation.
View more

SCB13-35kV series dry-type three-phase power transformer

Epoxy cast non excited pressure regulating dry transformer is made of F-grade epoxy resin mixture with fillers. After vacuum film degassing, high and low voltage coils reinforced with glass fiber forming mesh are placed on the inner and outer surfaces of the thin layer casting under vacuum and pressure. It is a dry-type transformer with high mechanical strength, electrical strength, heat resistance, low loss, low noise, strong heat dissipation ability, and equipped with a complete temperature protection control system. It is an excellent product for urban power grid renovation, widely used in important places such as power, railway (road), energy, chemical, high-rise buildings, airports, power stations, commercial centers, etc. that require fire prevention, explosion prevention, and moisture prevention.
View more
< 1...567...9 >